TRAPEZOIDAL SHEET PRODUCTION

TRAPEZOIDAL SHEETS, ROOF AND WALL PROFILES [envira-gallery id="2880"] Production length: 500-13500 mm PIR layer classification B REI 15 min (MSZ EN 1365-2:2005; MSZ EN 13501-2:2016) TMI certified. Mineral wool layer classification A2 REI 30 min (MSZ EN 1365-2:2005; MSZ EN 13501-2:2016) TMI certified. ES.T8 wall profile [envira-gallery id="2886"] ES.T20 wall profile [envira-gallery id="2889"] ES.T35 wall profile [envira-gallery id="2891"] ES.T20 roof profile [envira-gallery id="2893"] ES.T35 roof profile [envira-gallery id="2895"] ES.T153 roof profile [envira-gallery id="2897"]

Additional service information and pictures

C/Z PROFILES

[envira-gallery id="2903"] Bar dimensions: 100 – 400 mm Quality: S350 GD Coating: Z 275/Z 400 Drilling and length tolerance: +/- 1.0 mm Length: 1 m - 15 m Thickness: 1.5 mm - 4 mm Documentation: 'CE' mark certificate according to EN 1090-2, quality certificate 3.1, Declaration of conformity Drilling: round and oval holes, on request. Our options: Thanks to our technology, our company not only rolls standard elements, but also customized dimensions up to: e.g. Z 225 x 45/35 mm , if you require. Our products can also be ordered with pre-annealed edges, so that corrosion of the product will never occur. We can drill holes anywhere on the profile, even on different parts of the upper and lower leaves. See our catalogue: Z/C profile catalogue

Additional service information and pictures

BENDING

Individually bent elements (cornices, furrows, etc.) We can supply individually bent elements, 0.4 mm - 2-4 mm thick, in lengths of up to 7.2 m, in aluminium, steel and a wide range of colours. Recent equipment purchases have significantly increased the capacity of our bending machines, which means we can fulfil orders within the specified timeframe. We don't have to worry about stock shortages, if you are pressed for time, we can produce your special bent element - in small quantities - within 24 hours. [envira-gallery id="2484"] Plate splitting and custom sized slab elements We undertake splitting and slabbing of 5 tonne rolls to individual sizes with mm precision. Boards with coloured and galvanised surface We can also customise the length and width of the panels to suit the customer's requirements in a wide range of coloured aluminium. They are also available in the same colours as the guttering and with a natural finish. In the building industry, it can be a solution to many problems thanks to its excellent quality, as we can produce seam sheet roofing, facade cladding, decorative coverings, and edging elements. Omclad homlokzati rendszer modern megjelenés választható fugatávolság stabil szerkezet, rejtett rögzítésekkel bel- és kültéri alkalmazás egyaránt széles felhasználási terület (lakó- és iroda épületek, csarnokok burkolása, stb.) Pre-seaming Our rolling line can even be used to seam and cut to size the sheet metal you bring in, so you can just do the installation on site. Ask for our offer for contract work from brought material!

Additional service information and pictures

Kerítéselemek

Kerítéselemek teljesen gondozásmentes (nem igényel festést, vagy csiszolást) könnyű beépítés, felszerelés merev, de alacsony önsúlyú rendszer nem repedezik, vetemedik, vagy fakul egyedi méretek rendelésre prémium, teljesen zárt kialakításban [envira-gallery id="2493"]

Additional service information and pictures

PLATE PROCESSING

Our company is able to process 2.5 m x 12 m sheets up to 80 mm thick in the following qualities: -S235 JR -S355 J2 -S 460 NL -S 690 QL -S 700 MC Operations that can be performed: -drilling up to 8 - 250 mm diameter up to 80 mm plate thickness -mill working, edge chipping -threading -plasma cutting, flame cutting -marking and labelling, even by drawing the contours of the part to be connected to the plates.

Additional service information and pictures

Manufacture of steel structures

Deadlines met. Everyone who contacts us is served by a system. Thus, we can ensure that the requested deadline will be met, and you can plan your processes. Everything is automated, from the issue of the quote to the delivery of handover documentation. The production process utilizes our staff’s decades of experience and is performed in our production hall equipped with state-of-the-art machinery. Ensured quality. ÉMI-TÜV SÜD KFT. gives its name and qualification only to those who can meet their requirements. We demand high standards from our suppliers, so that we too can meet industry standards like EN 1090-2 and DIN EN ISO 3834-2:2006. According to our certification, our company meets the welding-related requirements of EN 1090-2 and DIN EN ISO 3834-2:2006 in all EU member states, has the appropriate material and human resources and operates a quality management system in accordance with EN 1090-2. Our company is authorised to perform supplier activities throughout the EU market and to place the CE mark on its products. Our services: -3D modelling design – creating product plans for you - Manufacture of steel structures – building and technology structures - Parting section steels to fixed size, boring/punching - Painting with airless technology, pre-treatment with abrasive blasting. - We can also produce components with laser and plasma cutting.

Additional service information and pictures

Solar panel support structure production

We are producers from PV-Steelstructures. ● Many installation options ● Solar Systems for different panelsizes ● Alternative angle of inclination ● Galvanised ● Load capacity certified by statical oppinion [envira-gallery id="3194"]

Additional service information and pictures

BENDING

Individually bent elements (cornices, furrows, etc.) We can supply individually bent elements, 0.4 mm - 2-4 mm thick, in lengths of up to 7.2 m, in aluminium, steel and a wide range of colours. Recent equipment purchases have significantly increased the capacity of our bending machines, which means we can fulfil orders within the specified timeframe. We don't have to worry about stock shortages, if you are pressed for time, we can produce your special bent element - in small quantities - within 24 hours. [envira-gallery id="2484"] Plate splitting and custom sized slab elements We undertake splitting and slabbing of 5 tonne rolls to individual sizes with mm precision. Boards with coloured and galvanised surface We can also customise the length and width of the panels to suit the customer's requirements in a wide range of coloured aluminium. They are also available in the same colours as the guttering and with a natural finish. In the building industry, it can be a solution to many problems thanks to its excellent quality, as we can produce seam sheet roofing, facade cladding, decorative coverings, and edging elements. Fence elements, wooden beams Young, modern and 21st century. These are the words that describe our plate fences, which we offer you with 100% confidence. No need to look for a solution to paint or replace the entire fence, we are talking about maintenance-free elements. Would you rather stick to a wooden fence? No problem for us, we have wood pattern fence elements that will really make painting and renovation a breeze. We are talking about elements that are easy to assemble and can be installed either vertically or horizontally. Trust us, it is one of the most cost-effective and simplest solutions to your fencing problem. [envira-gallery id="2493"] Pre-seaming Our rolling line can even be used to seam and cut to size the sheet metal you bring in, so you can just do the installation on site. Ask for our offer for contract work from brought material!

Additional service information and pictures

FIXED BUILDING SHADING PRODUCTION

FIXED BUILDING SHADING For energy efficient buildings Fixed louvre blinds are decorative outdoor blinds that prevent the sun's rays from entering the building directly, thus requiring less cooling power to be introduced into the building, thereby increasing the building's energy efficiency. Ideal for glass surfaces in modern office buildings and retail premises. The louvre blinds are made from Z louvres, painted with powder coating and, after sizing, positioned at the correct angle of inclination. [envira-gallery id="2396"]

Additional service information and pictures

PLATE PROCESSING

Our company is able to process 2.5 m x 12 m sheets up to 80 mm thick in the following qualities: -S235 JR -S355 J2 -S 460 NL -S 690 QL -S 700 MC Operations that can be performed: -drilling up to 8 - 250 mm diameter up to 80 mm plate thickness -mill working, edge chipping -threading -plasma cutting, flame cutting -marking and labelling, even by drawing the contours of the part to be connected to the plates.

Additional service information and pictures

Manufacture of steel structures

Deadlines met. Everyone who contacts us is served by a system. Thus, we can ensure that the requested deadline will be met, and you can plan your processes. Everything is automated, from the issue of the quote to the delivery of handover documentation. The production process utilizes our staff’s decades of experience and is performed in our production hall equipped with state-of-the-art machinery. Ensured quality. ÉMI-TÜV SÜD KFT. gives its name and qualification only to those who can meet their requirements. We demand high standards from our suppliers, so that we too can meet industry standards like EN 1090-2 and DIN EN ISO 3834-2:2006. According to our certification, our company meets the welding-related requirements of EN 1090-2 and DIN EN ISO 3834-2:2006 in all EU member states, has the appropriate material and human resources and operates a quality management system in accordance with EN 1090-2. Our company is authorised to perform supplier activities throughout the EU market and to place the CE mark on its products. Our services: -3D modelling design – creating product plans for you - Manufacture of steel structures – building and technology structures - Parting section steels to fixed size, boring/punching - Painting with airless technology, pre-treatment with abrasive blasting. - We can also produce components with laser and plasma cutting.

Additional service information and pictures